Replacing the Pool Filter Motor

At the close of the last post regarding year 2 of Pool Wars I was standing looking at a dead motor. And I had ordered and received the $300 replacement. Now my Dad was an electrician in the Navy so over the years he did any work associated with electrical  issues. But I knew that over the last few years there were wiring issues in the house that needed repair or replacement. Plus periodically, when flipping the switch behind the filter, it wouldn't engage. My guess was a loose wire causing a short. But this wasn't a lamp or a fuse, this pump motor was hard wired. And with the house heading toward FOR SALE, I just didn't want to take a chance. My brother had given me a quick verbal rundown on 'how to' and it seemed something I could accomplish, but my concern was should anything fail causing an electrical fire it was important that a licensed electrician had done the work. Plus the outlet by the pool wasn't working and one by one several outlets in both the house and Little House ceased to work. So I called an electrician.

This is one of those moments, of many, when my Mother weighed in. I went home, explained the status and informed her a electrician would come the next day to do it all. She looked up and said "Your father always did that sort of work." Now it wasn't said like a question, just a flat statement. I just stood there, even looking around and at myself...maybe my Dad had materialized or I'd morphed into my Dad....until I finally said, "Ah, I'm not Dad and I think a licensed electrician is needed". Still looking at me in what I've learned years ago as the 'you aren't correctly interrupting what I'm saying', I waited. Finally she gave up and concurred.

The next day I arrived at the house and began to realize that the electrician would wire the pump but I really should have the pump ready for that to happen. For 2 hours--I struggled with the filter/pump motor area. At this point the 42 year old filter has essentially been held together with epoxy, so a simple pipe wrench, screwdriver and muscle may not detach the filter/pump motor. All those tools I'd organized for over a year gave me the hardware I needed. I used several pipe wrenches and 2 screwdrivers but often simply turning the PCV wasn't possible--EPOXY. Plus I didn't want to break any old repaired areas in removing the unit. Finally aided by a vast array of 'sailor speak' I had detached 1. and 2. with no damage. (see photo)  But detaching the actual  filter/pump motor from the aged round unit holding the sand? And no matter what I did, the fitting where it would logically be removed, wouldn't budge from the unit side. But the threaded portion attached to the filter/pump motor-that would move. (above the right corner of the photo)

 My only option at this point was to unscrew the filter/pump motor from the main filter, and I mean by rotating the entire filter/pump motor. So, for the next 40 minutes I turned it bit by bit, until it detached. I was able to lift it off and set in its place the replacement and just as the electrician pulled into the driveway. He quickly hard wired it back together and it worked. He found that a fuse in the Little House was all that was needed to fix half the outlets. Like endless times since my Dad passed, I walked to the cellar and pulled out a tiny drawer in the metal box and pulled out exactly what was needed, a 20 amp fuse. The other half of the outlets.....Duh Moment, the outlet box on the cement patio on the back of the house? Fixed by pushing the reset switch.

After the electrician departed and only a $75 invoice, which I thought was good value for the money, I fired up the pump and began getting the pool fit for swimming. After that, pool wise, it was a fairly good summer. No one but me swimming in the pool which makes it difficult to keep algae at bay but I enjoyed the pool between lawn mowing, sorting possessions, trimming hedges and dealing with the 'caretaker'.